Mounting & Support

Mounting & Support

15mm Rod
from $ 20.00

15mm Rod

BP19 - 19mm Bridge Plate

BP19 - 19mm Bridge Plate

by OMOD | AKS
$ 499.00

OFFHOLLYWOOD's BP19 19mm Bridge PlateåÊis an ARRI standard bridge plate with 19mm studio rods (rods spaced 104mm center to center).

This design is RED standard height designed to be used with a riser plate from OFFHOLLYWOOD, WOODEN CAMERA or DSMC legacy riser plates from ViewFactor or Element Technica.

An optional shim plate converts the height toåÊARRI standard height making it compatible with any type of camera rig.

Includes:
(2) 3/8-16 screws

.85 lbs.

DSMC2 CAGE KIT
from $ 599.00

DSMC2 CAGE KIT

DSMC2 CAGE KIT

by OMOD | AKS
$ 599.00

DSMC2 CAGE KIT 1.0 contains:

1 x DSMC2 Standard Top Plate (fits all DSMC2 cameras with any module)

1 x DSMC2 Riser

2 x DSMC2 Wide Side Arm

1 x DSMC2 Side Plate

 

DSMC2 CAGE KIT 2.0 contains:

1 x DSMC2  Extended Top Plate A (Fits DSMC2 camera + OMOD Command)

1 x DSMC2 Riser

2 x DSMC2 Wide Side Arm

1 x OMOD Low Profile Side Arm

1 x DSMC2 Side Plate

  

DSMC2 CAGE KIT 3.0 contains:

1 x OMOD XLR2 EXTENDED TOP PLATE 

1 x DSMC2 Riser

2 x DSMC2 Wide Side Arm

1 x OMOD Low Profile Side Arm

1 x DSMC2 Side Plate

  

 

DSMC2 RISER PLATE

DSMC2 RISER PLATE

by OMOD | AKS
$ 159.00

The OMOD | AKS DSMC2 Riser Plate shims your DSMC2 camera up to standard accessory height using the original RED, Wooden Camera, Element Technica and OMOD | AKS BP19.

DSMC2 SIDE ARMS
from $ 159.00

DSMC2 SIDE ARMS

DSMC2 SIDE ARMS

by OMOD | AKS
$ 159.00

Use OMOD | AKS DSMC2 SIDE ARMS to make a cage with our Riser and Top Plate options.

Choose or combine two options:

Wide - our most popular arm clears the SSD Module on the Operator side of the camera and features (2) angles 3/8-16 holes in addition to (5) ARRI patterned 3/8-16 holes and (8) 1/4-20 holes. Can be used on both sides of the camera.

OMOD Low Profile - this arm is designed specifically for using an OMOD with your DSMC2 camera. Ultra-low profile that mounts in the space typically taken by RED's Base Expanders connectors - features (4) ARRI patterned 3/8-16 holes and (6) 1/4-20 holes

All OMOD | AKS DSMC2 Side Arms come with (2) captive 1/4-20's for mating with our DSMC2 Riser Plate and DSMC2 Top Plate - Standard or OMOD Top Plates.

DSMC2 SIDE PLATE

DSMC2 SIDE PLATE

by OMOD | AKS
$ 69.00

This bracket attaches to any top plate or riser with 9mm spaced 1/4-20's. It features two captive 1/4-20 screws and have 1 x 3/8-16 tapped hole with ARRI pattern and 9 x 1/4-20 tapped holes with 9mm spacing. This plate can also be used to screw down horizontally onto a top plate or cheeseplate to add a 3/8-16mm tapped hole w/ARRI pattern.

DSMC2 STANDARD TOP PLATE

DSMC2 STANDARD TOP PLATE

by OMOD | AKS
$ 249.00

The OMOD | AKS DSMC2 Standard Top Plate is a low profile (10mm high) top cheese-plate that attaches to the Weapon and Scarlet-W DSMC2 camera brain via 1/4-20 screws. (PLEASE NOTE THIS IS COMPATIBLE WITH THE RAVEN BRAIN BY USING TWO SCREWS ONLY)

It has 58 x 1/4-20 threaded mounting holes and 5 3/8-16 threaded mounting holes with ARRI accessory alignment patterns.

Pogo pins allow run / stop trigger from DSMC2 handles that feature integrated record start/stop buttons and allow handles to be reversed and extend in the direction of the lens.

Attach the RED 7" or 4.7" Touchscreen or LEMO Adapter without interference with the plate - including the ability to mount the 4.7" Touchscreen on operator side of DSMC2 camera.

Build a cage by combining our Side Arms, Side Plate and Riser.

Includes (4) 1/4-20 screws

*NEW VERSION* Now compatible with Arri CCH-2 Center Camera Handle!

Extended Top Plates for OMODs Save $ 70.00
$ 349.00
from $ 279.00

Extended Top Plates for OMODs

Extended Top Plates for OMODs

by TERADEK OMOD | AKS
$ 279.00

The TERADEK OMOD | AKS Top Plates extend our low profile DSMC2 Top Plate design to cover an attached OMOD Module.

The plate mates via 1/4-20 screws into both the DSMC2 camera brain and the OMOD Module.

Pogo pins allow run / stop trigger from DSMC2 handles that feature integrated record start/stop buttons and allow handles to be reversed and extend in the direction of the lens.

Attach the RED 7" Touchscreen or LEMO Adapter on top or side of the DSMC2 camera without interference with the plate.

Available in 2 lengths:

Version A:117mm long - covers DSMC2 camera + OMOD POE or OMOD COMMAND+

OMOD XLR2 EXTENDED TOP PLATE :132mm long - covers DSMC2 camera +  OMOD XLR2

Build a cage by combining our Side Arms and Riser.

Includes (6) 1/4-20 screws

IKAN 15mm Rods 6" (PAIR)
Safety NATO Rail (100mm)

Safety NATO Rail (100mm)

by Wooden Camera
$ 99.00

NATO standard, 100mm long, quick release rail attaches to any two 1/4-20 holes up to 72mm apart center to center and provides a mount for NATO Handles and NATO Clamps. Spring loaded pins on each end to prevent accidental accessory removal. Compatible RED and third party NATO style accessories.

Includes:
(2) 1/4-20 x 3/8" screws

Specifications:
Weight: 40g (0.1 lbs)
Dimensions: 100.3 x 21.7 x 13.5 mm (3.9 x 0.9 x 0.5 in)

Ultra Arm Clamp (Double Ball)

by Wooden Camera
$ 45.00

IN STOCK Complete purchase by 3pm CST and order will ship same business day.

Ultra Arm Clamp (Double Ball) is a component of our Ultra Arm lineup which clamps two 25mm (1 inch) ball attachments together.

Compatible attachements include:
Ultra Arm Ball (1/4-20)
Ultra Arm Ball (3/8-16)
Ultra Arm Ball (NATO Clamp)
Ultra Arm Ball (Hot Shoe)
Ultra Arm Ball (Super Clamp)
Ultra Arm Double Ball (3")
Ultra Arm Double Ball (5")
Ultra Arm Double Ball (8")

This component is also compatible with existing 3rd party 25mm ball mounts.

Specifications:
Weight: 90.7 g (0.2 lbs)
Dimensions: 50.8 x 76.2 x 25.4 mm ( 2 x 3 x 1 in)

Ultra Arm Demonstration:

Ultra Arm Double Ball (5")

by Wooden Camera
$ 45.00


IN STOCK Complete purchase by 3pm CST and order will ship same business day.

Ultra Arm Double Ball (5") is a component of our Ultra Arm lineup which has a 25mm (1 inch) ball on each measuring 5 inches (127mm) from center to center. Great for building custom arm configurations!

This component is also compatible with existing 3rd party 25mm ball mounts.

Specifications:
Weight: 90.7 g (0.2 lbs)
Dimensions: 25.4 x 127 x 25.4 mm ( 1 x 5 x 1 in)
Ultra Arm Demonstration:

Newsshooter IBC 2016 Ultra Arm Demonstration:

åÊ

USED DSMC Wooden Camera A Box

This is a used product. The Wooden Camera A Box for the DSMC line of Red cameras.åÊ

åÊ

From the manufacturer:

"Adapts industry standard balanced XLR male plugs to 3.5mm balanced plugs (female). Highest quality professional grade connectors.

- includes free Bolt On 19mm Rod for attaching to any 1/4-20 threaded hole
- rod hole is natively 19mm
- optional item 15mm Adapter Bushing adapts A-Box to 15mm rods"

 

UFF-1 Universal Follow Focus is the first follow focus to be compatible with 15mm LW, 15mm Studio, and 19mm rods without the use of adapters. Simply unlock the clamps and slide to the appropriate rod position. Notches in the bottom of the bridge indicate when the clamp is in the correct position.

The included swing arm and lens gears can be flipped to the front or back position which is helpful for compact lens configuration and the bridge has the lowest height in the industry so it will work with larger zoom lens barrels.

The hand wheel is compatible with the standard marking disc and hard stop disc which provides positionable limits when using DSLR lenses with infinite barrel rotation. In total, 2 marking discs and 1 hard stop disc are included. The hand wheel is removable and has a standard accessory port for use with the focus whip and crank (not included). 

Included in the kit are 5 gear attachments:
.5 mod for Canon ENG
.6 mod for Fujinon ENG
.8 mod small diameter for Cinema Lenses
.8 mod large diameter for Cinema Lenses
Friction Gear for DSLR lenses

Each kit ships in custom cut foam which fits natively into a Pelican 1500 case (not included).

Included Items:
1x Adjustable Bridge with Rod Clamps
1x Hand Wheel
1x Hard Stop Disc
2x Standard Marking Discs
5x Focus Gears (.5 mod, .6 mod, .8 mod small, .8 mod large, Friction Gear)
1x Custom Cut Foam for a Pelican 1500 Case (not included)

Also available - 
UFF-1 Universal Follow Focus (Pro) with complete set of includes.

UFF-1 Universal Follow Focus Demo:

UFF-1 Universal Follow Focus is the first follow focus to be compatible with 15mm LW, 15mm Studio, and 19mm rods without the use of adapters. Simply unlock the clamps and slide to the appropriate rod position. Notches in the bottom of the bridge indicate when the clamp is in the correct position.

The included swing arm and lens gears can be flipped to the front or back position which is helpful for compact lens configuration and the bridge has the lowest height in the industry so it will work with larger zoom lens barrels.

Each of the two hand wheels is compatible with the standard marking disc and hard stop disc which provides positionable limits when using DSLR lenses with infinite barrel rotation. In total, 10 marking discs and 2 hard stop discs are included. The hand wheels are removable and have standard accessory ports for the included focus whip and crank. The crank's unique design has the same accessory port on the backside which allows the whip to be plugged in when needed.

The hand wheel extension allows users to offset either wheel by 75mm (3 inches) which is great when using a large diameter lens or when in 15mm studio mode.

Included in the kit are 5 gear attachments:
.5 mod for Canon ENG
.6 mod for Fujinon ENG
.8 mod small diameter for Cinema Lenses
.8 mod large diameter for Cinema Lenses
Friction Gear for DSLR lenses

Each kit ships in custom cut foam which fits natively into a Pelican 1500 case (not included).

Included Items:
1x Adjustable Bridge with Rod Clamps
2x Hand Wheels
2x Hard Stop Discs
10x Standard Marking Discs
1x Hand Wheel Extension
1x Focus Whip
1x Focus Crank
5x Focus Gears (.5 mod, .6 mod, .8 mod small, .8 mod large, Friction Gear)
1x Custom Cut Foam for a Pelican 1500 Case (not included)

Also available - 
UFF-1 Universal Follow Focus (Base) for more simple configurations. 

UFF-1 Universal Follow Focus Demo:
Wooden Camera - 15mm Tube Clamp
Wooden Camera - Microphone Shock Mount

Pass Through Top plate for RED Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), and Raven which provides 26pin LCD connection and 3pin trigger handle interface. Arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places. Attaches to top of camera by (4) 1/4-20 captured screws.


This product is great for adding mounting points to your DSMC2 camera and allows for other cage and cable components like theåÊSafety NATO Arm (Weapon/Epic-W/Scarlet-W/Raven) and RED Male Pogo To Female Pogo LCD/EVF Cables to be attached as well.

Includes:
(4) 1/4-20 x captured screws

A glimpse of the Pass Through Top Plate as used in our WiFi Side Plate demo:

Tool-less LCD/EVF Adapter (Weapon/Epic-W/Scarlet-W/Epic-W/Raven) provides 26pin connection on top and bottom for turning the RED 4.7" Touchscreen into a tool-less monitor! It also works great with the DSMC2 RED EVF (OLED) when using RED's integrated mount. You can put the torx wrench away after you install this device.


This can also be used as a riser for the LCD to add 15mm (.6 inches) of height above the camera top.


SPECIAL NOTE: Please note that there is not enough clearance on the top of the camera body to accommodate both the Tool-less LCD/EVF Adapter and the Trigger Handle in place at the same time. We are currently looking into alternate methods to achieve compatibility between these two products.

SPECIFICATIONS:
Weight: 45.3 g (0.1 lbs)
Dimensions: 25.4 x 76.2 x 25.4 mm ( 1 x 3 x 1 in)

Wooden Camera - Universal Offset Bracket

Wooden Camera - Universal Offset Bracket

by Wooden Camera
$ 65.00
Universal Offset Bracket attaches by an ARRI style accessory mount, 3/8-16 with locating pins adjacent. It can also attach by using two included 1/4-20 or 3/8-16 screws spaced up to 77mm (3 inches) apart center to center. Provides an ARRI style accessory mount spaced 100mm from the original mounting hole. Works great withåÊMicrophone Shock Mount.
Wooden Camera 19mm Rod

Wooden Camera 19mm Rod

by Wooden Camera
$ 20.00
19mm diameter iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more.

** Sold as single rods. If a pair of rods are required, add two to cart. **
Wooden Camera Director's Monitor Cage
Wooden Camera Director's Monitor Cage v2

Wooden Camera Director's Monitor Cage v2

by Wooden Camera
$ 299.00

The Director's Monitor Cage v2 is engineered to be universally compatible with any monitor up to 9 inches (measured diagonally) and attaches via top, bottom, or rear 1/4-20 mounting locations. Newly designed main brackets also allow direct mounting to the rear of Convergent Design Odyssey and Apollo. 

The DMCv2 arrives mostly pre-assembled, with simplified, rod-based height adjustment. Ergonomic wooden hand grips can be quickly positioned via the built-in 15mm clamps. The battery mounting plate features V-Mount and Gold Mount attachment points as well as swing away functionality for easy access to the rear of the monitor and installed wireless devices. The cage includes a built in baby pin clamp with locking thumbwheel for stand mounting.

The included sun shade is adaptable to most monitors and snaps directly to the cage frame. The bottom of the shade is made of velcro, which can be adjusted to the proper width of the monitor and an included loop piece can be used to hook onto the bottom of the cage for a more permanent mounting of the shade.

The tool-less design of the handles allow them to be folded in for easy packing and the sun shade can be repurposed to act as a protective cover. Also included is a padded neck strap with 4 mounting points, a Teradek mounting bracket that offers easy attachment for wireless receivers with lower #4-40 or 1/4-20 mounting points, and a cable tie for cable management. 

Vertical and side-by-side mounting of two monitors is also possible with the Dual Director's Monitor Cage v2!

Includes:
(6) 1/4-20 x 1/2" button head screws
(6) 1/4-20 x 3/8" button head screws
(2) Offset adapters
(4) M3 x 8mm philips screws (for V-Mount plate)
(4) M3 x 12mm philips screws (for Gold Mount plate)
(1) M2.5 x 4mm socket cap screw (for Odyssey 7Q location pin)
(1) Teradek Mounting Bracket
(1) 1/4-20 x 1 1/4" button head screw and 1/4-20 nut (for Teradek Bolt)
(4) #4-40 x 1/2" socket cap screws ( for Teradek receiver)
(4) M3 x 20mm socket cap screws (for Odyssey 7Q)
(1) WC Cable Tie
(1) Sun Shade
(1) Sun Shade (velcro loop for Odyssey)

SPECIFICATIONS:
Weight: 1179.34g (2 lbs 9.6oz)
Dimensions: 279.4 x 177.8 x 101.6 mm (11 x 7 x 4 in)

Director’s Monitor Cage Instructions And Monitor Installation Guide

For powering LCD and wireless receiver, consider the WC V-Mount (Dual D-Tap) or WC Gold Mount (Dual D-Tap).

Director's Monitor Cage v2 Overview:

Capture.Share.

Our Brands