OMOD

OMOD

Advanced modules for RED DSMC2 cameras used on major productions.
OMOD XLR2
$ 2,799.00

OMOD XLR2

OMOD XLR2

by Teradek
$ 2,799.00

OMOD XLR2 is our second generation of the OMOD XLR module for your RED DSMC2 camera that adds professional in-camera audio features including push-to-operate controls, high pass filters, peak warning indicators, per channel line / mic level control and per channel Phantom power (+48v). AES or analog audio input.

This new version features headphone confidence monitoring from the camera's brain - so you hear what the camera is recording and you also can listen to audio on playback from the camera. Other improvements include an adjustment to the limiter allowing operators to ride the levels higher in addition to new, improved knurled knobs. Units ship with our MOD GUARD attached for added protection when your module is not attached to your camera.

Upgrade options will be offered to existing customers who purchased the first gen OMOD XLR. 

Connectors:

• Full size, balanced XLR inputs
• AES or Analog audio input
• +48V Phantom Power (per channel)
• Line / Mic level selection (per channel)
• 3.5mm Headphone Monitoring of DSMC2
camera for confidence and audio on playback
• 3-pin Aux Power + Run/Stop Trigger
• 5-pin Timecode Input
• CRTL input for RT Motion MDR-M or MDR-SK
• SDI out + HDMI out
• DC/AC power input (DSMC/DSMC2 6-pin)
• Compatible with all RED approved DSMC2 battery modules and all DSMC2 cameras

Weight 1.3 lbs
Length (from back of camera) 51.5mm / 2in

Audio Signal Specifications:

MAX GAIN MIC 65dB - LINE 35dB
MAX INPUT MIC 0dBu - LINE +20dBu
INPUT IMPEDANCE MIC > 2K LINE >10K
MIC POWER +48V PHANTOM.
FREQUENCY RESPONSE +0; -1.5dB 20Hz to 20kHz
HI PASS FILTER -3dB @ 90Hz 6dB OCTAVE
HARMONIC DISTORTION <0.03% @ 1kHz 0dB - <0.15% @ 40-20kHz +15dBm
CROSSTALK <70dB 40Hz to15kHz
MAX OUTPUT LEVEL +18dBm / +14dBm MONITOR
OUTPUT IMPEDANCE <20R MONITOR PATHS
NOISE <-125dB EIN; MIC 20Hz-20kHz; 200R SOURCE/ < 80dB SNR; LINE 20Hz -20kHz
LIMITER THRESHOLD +8dB

Download OMOD Quick Start Guides & Firmware

 

OMOD COMMAND RT+

OMOD COMMAND RT+

by Teradek
$ 4,999.00

OMOD COMMAND RT+ is a module for your RED DSMC2 camera that adds 3-axis wireless lens control for use with Teradek RT's MK3.1 hand controller and Thumbwheels in addition to all of the features & functions of the OMOD COMMAND +:

  • Ambient ACN Wireless Timecode and Internal Genlock Generator
  • Powerful Dual Band WiFi and Advanced Signal Path Options
  • Wireless Color Processing Functionality with Three Independent HDSDI outputs.

Live color grade to the camera with:

  • Pomfort LiveGrade
  • Qtake
  • FilmLight Prelight
  • Colourlab
  • Codex Live

You can also connect Teradek RT lens motors for three axis PL lens control. LATITUDE allows control of focus and iris of EF lenses over RF at ranges up to 1500 feet.

The DSMC2's HDMI monitor path is converted to 10-bit HDSDI. CDL/1024 1D LUTs and 33x33x33 3D LUTs with ACES compliance, all in real-time, wireless to the camera.

Output the leading HDR display standard, SMPTE 2084, for real-time HDR images while shooting in addition to simultaneous monitoring standard dynamic range (SDR).

Connectors:
  • 3 x HD-SDI BNC
  • 6-pin DC/AC Power Input
  • 3-pin (VBATT power + run/stop)
  • 3 x 4-pin (FIZ - Teradek RTmotion lens motors)
  • 2 x 5-pin (Teradek RT Aux. Controller inputs for Thumbweels, Zoomrockers, etc)
  • 5-pin (TimeCode Input)
  • 2 x 4-pin 00 mini-size (2 x CTRL/rs232)
  • USB (+5V)
  • 3.5mm Stereo Mic Input
  • 3.5mm Headphone Out

Weight: 1.3 lbs
Length: (from back of DSMC2 Brain): 2 in / 51.5 mm

Download OMOD Quick Start Guides & Firmware

OMOD COMMAND+
$ 4,499.00

OMOD COMMAND+

OMOD COMMAND+

by Teradek
$ 4,499.00

OMOD COMMAND+ is a module for your RED DSMC2 camera that adds:

  • Ambient ACN Wireless Timecode and Internal Genlock Generator
  • Powerful Dual Band WiFi and Advanced Signal Path Options
  • Wireless Color Processing Functionality with Three Independent HDSDI outputs.

Live color grade to the camera with:

  • Pomfort LiveGrade
  • Qtake
  • FilmLight Prelight
  • Colourlab
  • Colorfront On-Set Live!
  • Codex Live.


The DSMC2's HDMI monitor path is converted 10-bit HDSDI. CDL/1024 1D LUTs and 33x33x33 3D LUTs with ACES compliance, all in real-time, wireless to the camera. Real-time resolution and frame-rate conversions including 1080 60i output.

Output the leading HDR display standard, SMPTE 2084, for real-time HDR images while shooting in addition to simultaneous monitoring standard dynamic range (SDR).

Read the OMOD Overview HERE

All OMOD models work on all DSMC2 cameras (Raven, Scarlet-W, Epic-W, Weapon 6K, Weapon w/S35 Helium, Weapon 8K VV)

Connectors:


3 x HD-SDI BNC
6-pin AC/ DC Power Input
Fischer 3-pin (power + run/stop)
5-pin (TimeCode Input)
4-pin 00 LEMO (CTRL/rs232)
USB (+5V)
3.5mm Stereo Mic Input
3.5mm Headphone Out

Weight: 1.05 lbs
Length: (from back of DSMC2 Brain): 1.4 in / 36.5mm

 Download OMOD Quick Start Guides & Firmware

OMOD POE Save $ 500.00
$ 2,499.00
$ 1,999.00

OMOD POE

OMOD POE

by OMOD | AKS
Save $ 500.00
$ 2,499.00
$ 1,999.00

OMOD POE is a module for your RED DSMC2 camera that adds wireless lens control for use with TERADEK RT's MK3.1 hand controller and Thumbwheels. You can also connect up to three Teradek RT lens motors for PL lens control. POE allows control of focus and iris of EF lenses over RF at ranges up to 1500 feet, making ideal for drones.

You can also link the POE to a stand-alone Latitude MDR for long range Foolcontrol.

CONNECTORS:

1 x HDSDI
1 x HDMI
1 x 6-pin LEMO DC Power Input
3.5mm stereo mic input
3.5mm stereo headphone jack
2 x 5-pin LEMO (IN-A, IN-B for RTmotion thumbwheel controllers)
1x 4-pin LEMO (FIZ - RTmotion lens motor)
1 x 5-pin LEMO (TimeCode Input)
1 x USB (+5V)

Weight: .95 lbs
Length: (from back of DSMC2 Brain): 1.44 in / 36.5mm

All OMOD models work on all DSMC2 cameras (Raven, Scarlet-W, Weapon 6K, Weapon w/S35 Helium, Weapon 8K VV)

Capture.Share.

Our Brands