OMOD AKS

OMOD AKS

OFFHOLLYWOOD's own line of camera accessories.
DSMC2 STANDARD TOP PLATE Save $ 50.00
$ 299.00
from $ 249.00

DSMC2 STANDARD TOP PLATE

DSMC2 STANDARD TOP PLATE

by OMOD | AKS
$ 299.00

The OMOD | AKS DSMC2 Standard Top Plate is a low profile (10mm high) top cheese-plate that attaches to the Weapon and Scarlet-W DSMC2 camera brain via 1/4-20 screws. (PLEASE NOTE THIS IS COMPATIBLE WITH THE RAVEN BRAIN BY USING TWO SCREWS ONLY)

It has 58 x 1/4-20 threaded mounting holes and 5 3/8-16 threaded mounting holes with ARRI accessory alignment patterns.

Pogo pins allow run / stop trigger from DSMC2 handles that feature integrated record start/stop buttons and allow handles to be reversed and extend in the direction of the lens.

Attach the RED 7" or 4.7" Touchscreen or LEMO Adapter without interference with the plate - including the ability to mount the 4.7" Touchscreen on operator side of DSMC2 camera.

Build a cage by combining our Side Arms, Side Plate and Riser.

Includes (4) 1/4-20 screws

*NEW VERSION* Now compatible with Arri CCH-2 Center Camera Handle!

DSMC2 RISER PLATE

DSMC2 RISER PLATE

by OMOD | AKS
$ 159.00

The OMOD | AKS DSMC2 Riser Plate shims your DSMC2 camera up to standard accessory height using the original RED, Wooden Camera, Element Technica and OMOD | AKS BP19.

DSMC2 SIDE PLATE

DSMC2 SIDE PLATE

by OMOD | AKS
$ 89.00

This bracket attaches to any top plate or riser with 9mm spaced 1/4-20's. It features two captive 1/4-20 screws and have 1 x 3/8-16 tapped hole with ARRI pattern and 9 x 1/4-20 tapped holes with 9mm spacing. This plate can also be used to screw down horizontally onto a top plate or cheeseplate to add a 3/8-16mm tapped hole w/ARRI pattern.

DSMC2 SIDE ARMS
from $ 159.00

DSMC2 SIDE ARMS

DSMC2 SIDE ARMS

by OMOD | AKS
$ 159.00

Use OMOD | AKS DSMC2 SIDE ARMS to make a cage with our Riser and Top Plate options.

Choose or combine two options:

Wide - our most popular arm clears the SSD Module on the Operator side of the camera and features (2) angles 3/8-16 holes in addition to (5) ARRI patterned 3/8-16 holes and (8) 1/4-20 holes. Can be used on both sides of the camera.

OMOD Low Profile - this arm is designed specifically for using an OMOD with your DSMC2 camera. Ultra-low profile that mounts in the space typically taken by RED's Base Expanders connectors - features (4) ARRI patterned 3/8-16 holes and (6) 1/4-20 holes

All OMOD | AKS DSMC2 Side Arms come with (2) captive 1/4-20's for mating with our DSMC2 Riser Plate and DSMC2 Top Plate - Standard or OMOD Top Plates.

Extended Top Plates for OMODs Save $ 50.00
$ 349.00
from $ 299.00

Extended Top Plates for OMODs

Extended Top Plates for OMODs

by OMOD | AKS
$ 349.00

The OFFHOLLYWOOD OMOD Top Plates extend our low profile DSMC2 Top Plate design to cover an attached OMOD Module.

The plate mates via 1/4-20 screws into both the DSMC2 camera brain and the OMOD Module.

Pogo pins allow run / stop trigger from DSMC2 handles that feature integrated record start/stop buttons and allow handles to be reversed and extend in the direction of the lens.

Attach the RED 7" Touchscreen or LEMO Adapter on top or side of the DSMC2 camera without interference with the plate.

Available in 2 lengths:

Version A:117mm long - covers DSMC2 camera + OMOD POE or OMDO COMMAND

Version B:132mm long - covers DSMC2 camera + OMOD COMMAND RT or OMOD XLR

Build a cage by combining our Side Arms and Riser.

Includes (6) 1/4-20 screws

åÊ

*NEW VERSION* Now compatible with Arri CCH-2 Center Camera Handle!

DSMC2 CAGE KIT
from $ 799.00

DSMC2 CAGE KIT

DSMC2 CAGE KIT

by OMOD | AKS
$ 799.00

DSMC2 CAGE KIT 1.0 contains:

1 x DSMC2 Standard Top Plate (fits all DSMC2 cameras)

1 x DSMC2 Riser

2 x DSMC2 Wide Side Arm

1 x DSMC2 Side Plate

åÊ

DSMC2 CAGE KIT 2.0 contains:

1 x DSMC2 Top Plate A (Fits DSMC2 camera + OMOD Command, OMOD POE)

1 x DSMC2 Riser

2 x DSMC2 Wide Side Arm

1 x OMOD Low Profile SideåÊArm

1 x DSMC2 Side Plate

åÊ

DSMC2 CAGE KIT 3.0 contains:

1 x DSMC2 Top Plate BåÊ(Fits DSMC2 camera + OMOD Command RT, OMOD XLR)

1 x DSMC2 Riser

2 x DSMC2 Wide Side Arm

1 x OMOD Low Profile SideåÊArm

1 x DSMC2 Side Plate

4-Pin to 4-Pin RTMotion Motor Cable Sold out
OFFHOLLYWOOD HANDLE KITS

OFFHOLLYWOOD HANDLE KITS

by OMOD | AKS
$ 275.00

Shipping Now!!

The OFFHOLLYWOOD HANDLE is comprised of components that can be connected to your desired camera handle configuration. Camera agnostic - the 15mm LW Rod Clamp Riser is compatible with top plates from OMOD | AKS, Wooden Camera, ARRI and others.

You can purchase components individually, or start with one of these cost saving kits and add components if needed.

STANDARD KIT:

åÊ

åÊ

1 x OFFHOLLYWOOD HANDLE 15mm LW Rod Clamp Riser
1 x OFFHOLLYWOOD HANDLE - Short Bar Extension
1 x OFFHOLLYWOOD HANDLE - Long Bar Extension
1 x 5mm T Shape Hex Tool
** 15mm rods not included

DELUXE KIT

1 x OFFHOLLYWOOD HANDLE 15mm LW Rod Clamp Riser
1 x OFFHOLLYWOOD HANDLE Back Riser
1 x OFFHOLLYWOOD HANDLE - Short Bar Extension
1 x OFFHOLLYWOOD HANDLE - Right Angle Bar Extension
2 x OFFHOLLYWOOD HANDLE - Long Bar Extension
1 x 5mm åÊT Shape Hex Tool
** 15mm rods not included

åÊ

2-Pin to 2-Pin Power Cable
2-pin to DC Male Power Cable

2-pin to DC Male Power Cable

by OMOD | AKS
$ 55.00

Rugged 2-pin to DC male power cable foråÊSmallHD 702 (using faux-LP-E6) or ATOMOS - 24"

also available in 3-pin Fischer version here ->

(** Do NOT use 3-pin Fischer version with ATOMOS monitor/recorders from 24V source. ATOMOS monitor/recorders are not spec'd for 24V but Small HD 702 is spec'd to 30V w/Faux LP-E6 adapter)

MOD GUARD
$ 24.00

MOD GUARD

MOD GUARD

by OMOD | AKS
$ 24.00

The MOD GUARD is a protective metal plate that allows any DSMC2 module from RED or any 3rd Party to screw into it - protecting the pogo pins from being damaged. Get one for every module you own.

 

 

2-Pin to P-Tap Power Cable
DSMC EVF/LCD CABLE
from $ 169.00

DSMC EVF/LCD CABLE

3-Pin Fischer to DC Male Power Cable
OFFHOLLYWOOD HANDLE - Short Bar Extension

This extension bar for the OFFHOLLYWOOD HANDLE connects to the 15mm LW Rod Clamp Riser to create a handle, and can also be connected to the Long Bar Extension or Right Angle Extension or another Short Bar Extension.

This is an individual component - you can also purchase the OFFHOLLYWOOD Handle-Basic Kit or the Deluxe Kit for extra savings.

74mm / 2.9" long

.25lbs

OFFHOLLYWOOD HANDLE - Long Bar Extension

 

This extension bar for the OFFHOLLYWOOD HANDLE connects to the 15mm LW Rod Clamp Riser to create a handle, and can also be connected to the Short Bar Extension or Right Angle Extension or another Long Bar Extension.

This is an individual component - you can also purchase the OFFHOLLYWOOD Handle-Basic Kit or the Deluxe Kit for extra savings.

119mm / 4.7" long

.40lbs

This is a 3-pin to 2-pin power cable to allow your to power 2-pin devices such as Teradek Bolt Transmitters or a Small HD 703 monitor from your OMOD, Wooden Camera D-Box ar ARRI camera's 3-pin power output.

** make sure when powering from ARRI cameras or Wooden Camera D-Box 3-pin Fischer connectors that the 2-pin product you are powering supports +24V DC. (OMOD's supply VBATT (+14.5V DC) from their 3-pin run/stop aux power connectors)

OFFHOLLYWOOD HANDLE 15mm LW Rod Clamp Riser

Shipping Now

This riser for the OFFHOLLYWOOD HANDLE provides 15mm rod clamps at LW spacing. Attach handleåÊextension components in either direction. Attaches with captive 1/4-20 screws to top plates from OFFHOLLYWOOD, Wooden Camera and ARRI. Camera agnostic.

This is an idvidiual component - you can also purchase the OFFHOLLYWOOD Handle-Basic Kit or the Deluxe Kit for extra savings.

** 15mm rods not included

OFFHOLLYWOOD HANDLE Back Riser
BP19 - 19mm Bridge Plate

BP19 - 19mm Bridge Plate

by OMOD | AKS
$ 499.00

OFFHOLLYWOOD's BP19 19mm Bridge PlateåÊis an ARRI standard bridge plate with 19mm studio rods (rods spaced 104mm center to center).

This design is RED standard height designed to be used with a riser plate from OFFHOLLYWOOD, WOODEN CAMERA or DSMC legacy riser plates from ViewFactor or Element Technica.

An optional shim plate converts the height toåÊARRI standard height making it compatible with any type of camera rig.

Includes:
(2) 3/8-16 screws

.85 lbs.