Comes with a Bolt 1000 Transmitter and Receiver set with an antenna array in an SKB Utility Case.
The Bolt 1000 Set
With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (1 Transmitter can multicast up to 4 Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included on these new models but with the following new features:
Transmit visually lossless
video up to 3000ft
with no delay.
Use more than twice as many Bolts in one location or avoid interference like never before.
2 New DFS Channels
more often in the USA and Europe by making use of two newly introduced DFS channels.
20% Smaller Chassis
Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.
Easily identify which Bolt
TX and RX work together with removable colored top plates.
Reconnect times during a dropped link are now instantaneous once you move back into range.
Built-In HDMI to SDI Converter
Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.
Than Ever Before
Reach your Bolt’s full range
and potential right out of
the box with new software
that provides the most robust wireless link we’ve ever created.
The Panel Antenna Array
The Teradek Array is a 5GHz MIMO panel antenna designed for use with Beam, Bolt 600, 1000, 2000, 3000 Receivers (Bolt Transmitters, Bolt 300 and Sidekick are not supported). The Array offers a more resilient wireless transmission, especially in challenging RF conditions, by focusing the signal and reducing interference. As a result, you may achieve a boost in the reception range but it will not be above the maximum range.
The Protective Case
The Teradek Protective SKB Case is an injection molded Military-Standard Waterproof Case molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design that is resistant to corrosion and impact damage. Features a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve, resistance to UV, solvents, corrosion, fungus and impact damage.
- Waterproof and dust tight design
- Molded-in hinge for added protection
- Trigger release latch system
- Snap-down rubber over-molded cushion grip handle
- Ambient pressure equalization valve
- Resistant to UV, solvents, corrosion, fungus
- Resistant to impact damage
1 Bolt 1000 Receiver 2 Bolt 1000 Receivers 1 AB Mount 1 V Mount
What's in the Box
- 1 x Bolt 1000 TX SDI/HDMI
- 1-2 (depending on option chosen) x Bolt 1000 RX SDI/HDMI
- 1 x Panel Antenna Array 5GHz 3x16dBi 2x 14dBi Black
- 1 x Bolt RX Single (AB or V) Mount Battery Plate 14.4V
- 1 x SKB Waterproof Utility Case (22 x 17 x 8 inches)
- 5 x N-Male to RP-SMA 12 inch cables (for use with Bolt Rx Only)
- 1 x 1/4 20" Thumb Screw (1.25 inch)
- 1 x 1/4 20" Thumb Screw Plastic Head 2 inch length
- 1 x 1/4 20 Thumb Screw Plastic Head 3/8 inch length
- 1 x 1/4-20 Screw Phil Pan Mach Black 3/8 inch
- 1 x 1/2 20" Lightstand Adapter
- 1 x 3/8" Lightstand Adapter
- 1 x 2-Pin Connector to PowerTap - 18 inch Cable
- 1 x 2-Pin Connector to PowerTap - 11 inch Cable
- 1 x PSU 2-Pin Connector 18W
- 1 x USB 3.0 SuperSpeed Cable (A to Micro, 3ft)
- 1 x Hot Shoe Adapter
- 2-3 x (2 for 1 Rx, 3 for 2 Rx) SDI Cables (BNC to BNC)
- 2-3 x (2 for 1 Rx, 3 for 2 Rx) HDMI Cables (Type A to Type A)
- 5 x Antenna 2dBi WiFi 5.8GHz
- 2 x Antenna 2dBi WiFi 2.4/5.8 GHz
- 1-Year Warranty on Bolt Units