Shopping Cart

Paralinx Tomahawk2 System

May be out of stock, please call (718)-389-8300 for availability.

$ 7,499.95

The Paralinx Tomahawk2 is a revolutionary HD video transmitter system offering real-time wireless HD with unprecedented range for your Television, Film, Broadcast, Industrial or UAV/UAS application.

The Tomahawk2 features several improvements from the original Tomahawk:

  • Dual-Input Transmitter (HD-SDI & HDMI options)
  • Receiver is much smaller & lighter
  • Input voltage range is now 6-28V on Transmitter
  • Machined-aluminum receiver enclosure
  • Enclosures feature ¼-20 & 4-40 mounting holes on base of Tx/Rx
  • Compatible with Teradek Bolt Sidekick (1st Gen)
  • Compatible with Bolt 2000* and Paralinx Tomahawk (1st Gen)*

The Paralinx Tomahawk2 has a range of up to 2000 feet** (600m) and still maintains an incredible <1ms latency glass-to-glass. Both the transmitter and receiver feature 2-Pin power connectors and the transmitter features a wide 6-28V input voltage range. The Tomahawk2 SDI system features both 3G-SDI input (with loop-out) & HDMI input on the transmitter, and a 3G-SDI output on the receiver.

The Tomahawk2 transmits Full-HD video (up to 1080p/60 4:2:2) and is capable of sending video to up to 4 receivers simultaneously. The transmitter weighs approximately 6.6oz/187g (without antennas) and the receiver weighs 12 oz/340g (without antennas).

The Paralinx Tomahawk2 System is available for US$7,499.95 for one transmitter and receiver pair. Additional receivers can be purchased for US$3,699.95 each. Battery plates, antennas, mounting brackets, power cables, and custom cases are all available as accessories to help customize your set-up. 

Tomahawk2 Features:

  • Lightweight Minimalist design for Handheld, Steadicam, Gimbal, and UAV Payload

  • Transmitter features both 3G-SDI & HDMI inputs and SDI loop-out. Receiver features 3G-SDI output.

  • Rugged machined-aluminum enclosure for both the transmitter and receiver

  • Ultra long-range transmission - Up to 2,000 feet (600 meters) *

  • REAL-TIME viewing - Less than 1 millisecond latency

  • Visually lossless full-HD video signal allow critically accurate monitoring

  • Multicast capable (up to 4 receivers per transmitter)

  • 128 bit AES Encryption - Secure transmission

  • Operates on 5gHz frequency band

  • Conforms to major technical and environmental standards including FCC, CE, MIC (TELEC) and RoHS Specifications

  • Click here for supported frame rates


* When linked to a Bolt 2000 or Paralinx Tomahawk unit the following features are not supported: PsF Audio, Run/Stop, Timecode

** Range may vary depending on environment and interference


Dimensions (Tx): 4.1in x 2.6in x 0.9in (not including antennas/connectors)
Dimensions (Tx): 104mm x 66mm x 22mm
Weight (Tx): 7.3oz / 208g (without antennas)

Dimensions (Rx): 4.6in x 3.5in x 0.9in (not including antennas/connectors)
Dimensions (Rx): 117mm x 88mm x 22mm
Weight (Rx):  8.9oz / 252g (without antennas)


1:1 Kits include:
1x Tomahawk2 SDI/HDMI transmitter
1x Tomahawk2 SDI receiver
1x PTap to Lemo power cable (18in/45cm)
1x AC power supply with 2-pin connector
1x 18" BNC Cable (right-angle to right-angle)
2x 5dbi omnidirectional antennas (for transmitter)
5x 2dbi omnidirectional antennas (for receiver)
1x Mini-USB to USB cable (for firmware updates)
1x Custom Case with rugged foam (Pelican 1400)

1:2 Kits include:
1x Tomahawk2 SDI/HDMI transmitter
2x Tomahawk2 SDI receivers
2x PTap to Lemo power cable (18in/45cm)
1x AC power supply with 2-pin connector
2x 18" BNC Cable (right-angle to right-angle)
2x 5dbi omnidirectional antennas (for transmitter)
10x 2dbi omnidirectional antennas (for receivers)
1x Mini-USB to USB cable (for firmware updates)
1x Custom Case with rugged foam (Pelican 1400)

Transmitter-only Kits include:
1x Tomahawk2 SDI/HDMI Transmitter
1x PTap to 2-pin power cable
1x 18in/45cm BNC cable (right-angle to right-angle)
1x 18in/45cm HDMI cable
2x 5dbi omnidirectional antennas
1x Mini-USB to USB cable (for firmware updates)

Receiver-only Kits include:
1x Tomahawk2 SDI Receiver
1x AC power supply with 2-pin connector
1x 18in/45cm BNC cable (right-angle to right-angle)
5x 2dbi omnidirectional antennas
1x Lightstand adapter
1x Mini-USB to USB cable (for firmware updates)

1:1 Deluxe Kits include:
1x Tomahawk2 SDI/HDMI Transmitter
1x Tomahawk2 SDI Receiver
1x Tomahawk2 Mounting Bracket (for transmitter)
1x Tomahawk2 Battery Plate Mount (for receiver)
1x AC power supply with 2-pin connector
2x PTap to 2-pin power cables
2x 18in/45cm BNC cables (right-angle to right-angle)
1x 18in/45cm HDMI cable
1x Mini-USB to USB cable (for firmware updates)
1x Paralinx Array MIMO panel antenna
5x Type-N to RP-SMA antenna cables
2x 5dbi omnidirectional antennas (for transmitter)
5x 2dbi omnidirectional antennas (for receiver)
1x Lightstand adaptor
1x Custom case with rugged foam (Pelican 1550)

1:2 Deluxe Kits include:
1x Tomahawk2 SDI/HDMI Transmitter
2x Tomahawk2 SDI Receivers
1x Tomahawk2 Mounting Bracket (for transmitter)
2x Tomahawk2 Battery Plate Mounts (for receivers)
1x AC power supply with 2-pin connector
3x PTap to 2-pin power cables
3x 18in/45cm BNC cables (right-angle to right-angle)
1x 18in/45cm HDMI cable
1x Mini-USB to USB cable (for firmware updates)
1x Paralinx Array MIMO panel antenna
5x Type-N to RP-SMA antenna cables
2x 5dbi omnidirectional antennas (for transmitter)
10x 2dbi omnidirectional antennas (for receivers)
1x Lightstand adaptor
1x Custom case with rugged foam (Pelican 1550)

PLEASE NOTE: Additional Power Cables for the Tomahawk2 system must be purchased separately. PTap to 2-pin, 2-pin to 2-pin, and JST-RCY to 2-pin options are available.

Please call (718)-389-8300 for avalibility.